PCS20 Power Clamping System
Hydraulic operated three jaw power clamp. A perfect companion for the MPS30 and MPS40 - manual cut off machines.

The clamp utilises the pouring cup of the investment casting runner tree, and can be designed to suit a wide range of cup sizes.

Once clamped the operator then has the ability to rotate the tree 360 Degrees to allow for quick and easy alignment of cut as well as adjustment of the tree for consecutive cuts with out releasing the clamped jaws. Once the correct position has been found a hydraulic brake ensures location is kept while cutting.

The PCS20 is easily integrated into the hydraulic system of an MPS30 or MPS40 or if required sold with its own independent hydraulic power supply.

Optional Rise and Fall
This Rise and Fall option for the PCS 20 gives the operator even greater flexibility to quickly set up the work piece where they would like it for optimum cutting. It provides up down motion and rotation motion giving a further 2 axis of motion to the PCS20.

Internal Features
A fully enclosed cutting area for safe, clean, low noise removal of cast parts. The abrasive cutting wheel is measured after every cut via displacement laser and the cutting speed is adjusted automatically to give best free cutting properties. The machine prompts the operator when the wheel is too small and the blade moves to a 'blade change' position for easy change of the cutting wheel. A work light illuminates the work area. The cut castings can be removed using a catch basket or conveyor.